OPTIMIZATION OF PRODUCTION COSTS WITH SIMPLEX METHOD

Authors

  • Firmansyah Firmansyah Universitas Muslim Nusantara Alwashliyah
  • Dedy Juliandri Panjaitan Universitas Muslim Nusantara Alwashliyah
  • Madyunus Salayan Universitas Muslim Nusantara Alwashliyah
  • Alistraja Dison Silalahi Universitas Muslim Nusantara Alwashliyah

DOI:

https://doi.org/10.24114/jcrs.v4i2.15277

Abstract

One of the problems in the company is my resource limitation, the time of production and the tools used in the production process. Companies in making decisions in production planning in the presence of these limitations, should seek to maximize the profit generated. However, in the production process a production planning reference is required to maximize the results obtained and minimize the production costs used. To solve the problem, needed a problem solving tool that is linear program using simplex method. Simplex method is one of the methods of linear program in solving the problem of more than two variables that can be applied into everyday life and can be used in production process planning. With one of the ultimate goal is the achievement of the optimum value with the constraints of limited resources. The results of the simplex method have decreased costs incurred less than the usual costs incurred every month and the results obtained using the simplex method can be used as a reference in making decisions to get optimal results on production costs in the company.

References

Suprapto, J. 1983. Linear Programming Edisi Kedua, Fakultas Ekonomi Universitas Indonesia. Jakarta.[2]Handayani, Monica dan Dewi, Eka Kusuma, 2016. œPerencanaan Bahan Baku dan Hasil Produksi Menggunakan Metode Linier Programming Simpleks. Business Manajement Journal. Vol.12 (2), Hal 232-242.[3] Rumahorbo, Rina Lusiana dan Mansyur, Abil. 2017. œKonsistensi Metode Simpleks Dalam Menentukan Nilai Optimum. Jurnal Karismatika. Vol. 3,(1), hal 36 “46.

Volume 4 Number 2p-ISSN: 2549-1849 | e-ISSN: 2549-343476[4] Chandra, Titin. 2015 œPenerapan Algoritma Simpleks dalam Aplikasi Penyelesaian Masalah Program Linier. Jurnal TIMES. Vol. 4, (1), hal 18-21.[5] Sukanta, Anwar Ilmar Ramadhan. 2016. œSimpleks Method Linear Program Application In Process Of Transition To Reduce Use Of Products In Polyster Material In Indonesia. International Journal Of Scientific& Technology Research. Vol.5 (9), hal. 106-110. [6] Dumairy. 20154Matematika Terapan Untu Bisnis Dan Ekonomi Edisi Kedua. Fakultas Ekonomika dan Bisnis UGM. Yogyakarta.[7] Handayani, Monica dan Dewi, Eka Kusuma,2016.œPerencanaan Bahan Baku dan Hasil Produksi Menggunakan Metode Linier Programming Simpleks. Business Manajement Journal.Vol.12 (2), Hal 232-242.[8]Kakiay, Thomas J.2008.Pemrograman Linier Metode dan Problema. Andi. Yogyakarta. [9]Lobo, J.Z.2015œTwo Square Determinant Approach for Simplex Method. Journal of Mathematics.Vol 11, (5). hal 01-04.[10]Sarkoyo, Andi.2016œMetode Simpleks dalam Optimalisasi Hasil Produksi. Informatics for Educators and Professionals. Vol. 1 (1), hal 27-36. [11] Sukanta, Anwar Ilmar Ramadhan. 2016. œSimpleks Method Linear Program Application In Process Of Transition To Reduce Use Of Products In Polyster Material In Indonesia. International Journal Of Scientific & Technology Research.Vol.5 (9), hal. 106-110. [12]Wirdasari, Dian.2009 œMetode Simpleks dalam Program Linier. Jurnal Saintikom,Vol 6 (1), hal 276-285

Downloads

Published

2020-12-31

Issue

Vol. 4 No. 2: July 2020

Section

Articles

License

Copyright (c) 2020 Firmansyah, Dedi Juliandri, Mad Yunus Salayan, Alistraja Dison Silalahi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.