PEMBUATAN ELEKTRODA SELEKTIF ION Cr (VI) DENGAN MENGGUNAKAN MEMBRAN KITOSAN

Authors

  • Agus Kembaren Jurusan Kimia
  • Roita T.T Panggabean Alumni Prodi Kimia

DOI:

https://doi.org/10.24114/jpkim.v6i1.5483

Abstract

Abstract This research was aimed to make and to determine analytical performance of  Cr (VI) ISE. The electrodes has made by mixing Chitosan(as electroactive), PVC (as matrix), and DBP (as plasticizer) in THF. Composition of PVC and DBP maintane in fix ratio, 1: 2, while the chitosan varried, 4%, 7%, 10%, 13% and 16%. The composite membrans soak into 1M K2Cr2O7 solution for the night, then tight on the tip of electrode body. Analytical performance of the electrodes were determined by nersnt factor and dynamic range, response time, selectifity coeficient, and life time. The results show that the electrodes with composition 4 % chitosan, 32 % DBP, and 64 % PVC have optimum performance. Dynamic range of this electrodes is between 10-5 M - 10-1 M , slope/nersnt factor 32.004 mv/decade, average response time 20.7 seconds. The electrodes are not interfered by  Mn2+, Zn2+ and Fe3+. The electrodes can used with good performance in 3 days. Kata kunci : Elektroda selektif ion, membran kitosan

Author Biographies

Agus Kembaren, Jurusan Kimia

FMIPA, Universitas Negeri Medan

Roita T.T Panggabean, Alumni Prodi Kimia

FMIPA, Universitas Negeri Medan

Downloads

Issue

Vol. 6 No. 1 (2014): April

Section

Articles

License

Copyright (c) 1970 Agus Kembaren, Roita T.T Panggabean

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors published in this journal agree to the following terms:

  1. The copyright of each article is retained by the author (s).
  2. The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
  3. Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work.

Creative Commons License

Jurnal Pendidikan Kimia is licensed under a Creative Commons Attribution 4.0 International License